Home ProductsIndustrial Ultrashort Pulse Laser ProductsPicosecond LasersHYPER RAPID

HYPER RAPID

The family of HyperRapid picosecond lasers offers performance at 50 W and 100 W at 1064 nm and 1000 kHz.

High Power Industrial Picosecond Laser

The HYPER RAPID family of high power industrial picosecond lasers is the higher power version of the transient-amplifier RAPID-series.

THE HYPER RAPID family consists of a 50W and a 100W model and uses a novel LUMERA LASER Technology to reach higher average power for high throughput applications in ps-laser micromachining.

The newest member of this industrial ultrafast laser family, the HYPER RAPID 100 is the first ever to offer pulse-on-demand and burst mode operation in a 100W laser system, enabling a whole range of new processes for machining brittle materials such as ceramics, sapphire and glass. Plus, with a lower cost-per-watt ratio than the previous system, applications that weren’t previously economically feasible are now possible.

Applications

Application
Process
Material
Glass Cutting & Drilling
Ink-Jet Nozzle Drilling
TCO Structuring
µ-via drilling
Printing & Embossing Tools
Printing
3D Contour Mapping
Glass
Ceramic
Sapphire

Features & Benefits

  • 50W/100W at 1064 nm and 1000 kHz
  • Pulse on demand
  • High beam quality M² < 1.4
  • Burst mode
  • Superior beam parameter and pointing stability across the complete PRF range
  • Industry approved
  • Low maintenance
HYPER RAPID 50
HYPER RAPID 100
Wavelength
1064 nm (532 nm and 355 nm optional)
Pulse Repetition Rate (kHz)
400 to 1000
400 to 1000
Spatial Mode
TEM00 (M2 < 1.4)
TEM00 (M2 < 1.4)
Pulse Duration (ps)
<15
Pulse-to-Pulse Energy stability (% rms)
<1 at 1064 nm and 500 kHz
Average Power Stability over 8 hours (% rms)
<1 at 1064 nm and 500 kHz
Polarization Ratio
>>100:1
Beam Divergence, Full Angle (mrad)
<1
<1
Beam Circularity (%)
>85
Beam-Pointing Stability in Full PRF range (µrad / °C)
<50
Electric Supply
100 to 230 VAC/50 to 60 Hz/2.5 kW
100 to 230 VAC/50 to 60 Hz/2.5 kW
Beam Diameter (μm)
~3000 at 1064 nm
~3000 at 1064 nm
Bore-Sight Accuracy
±0.5 mm and <5 mrad
Warm-Up Time
<40 min from chiller start

Please Read Before Continuing

Risk factors: Except for the historical information contained here, many of the matters discussed in this Web site are forward-looking statements, based on expectations at the time they were made, that involve risks and uncertainties that could cause our results to differ materially from those expressed or implied by such statements. These risks are detailed in the “Factors That May Affect Future Results” section of our latest 10-K or 10-Q filing. Coherent assumes no obligation to update these forward-looking statements.


I have read the terms and conditions